LevelOne ProCon GSW-2476 - Manuel (Page 85)

R
ESET THE
S
WITCH
A-3
Reset the Switch
As situation requires, you might want to reset the switch and to restore to
the default settings. To reset the switch:
1. Unplug the power cord from the power socket.
2. Unplug all cables from the ports.
3. Use an Ethernet cable to connect port 1 to port 2.
4. Plug the power cord back to the power socket
5. Wait at least 40 seconds before unplugging cables from port 1 and
port 2.
Note: After resetting the switch, every setting, including password and IP
address, will restore to the default value.