Using headphones, Using the music stand – KORG Digital Piano Concert NC-300 Manuel d'utilisation

Page 10

Advertising
background image

10

Adjust the volume.

Turn the VOLUME knob to adjust the output volume.

The VOLUME knob adjusts the level to the internal speakers, the
headphones, and the OUPUT jacks. Turn the knob left to reduce the
volume, or right to increase it. Setting the knob to the “0” position cuts of all
sound output.

Louder

Softer

Start with the knob in the “0” position and turn it slowly to raise the volume
as desired.

Using Headphones

Twin stereo headphones jacks are located under the left side of the
keyboard. Connecting headphones to either jack will cut off the sound
through the speakers. Use headphones when playing at night or whenever
you want to practice silently. You can connect up to two headphone sets at
the same time, so that two people can listen together.

To connect a stereo headphone set: Insert the headphone plug (stereo
1/4"plug) into either headphone jacks.

If you are using headphones fitted with a 1/8"-to-1/4"adapter plug, be sure
to grasp the adapter plug when connecting or unplugging the headphones.

To protect your ears and prevent possible loss of hearing, avoid prolonged
listening to headphones at high volume.

Using the Music Stand

Raise the stand by lifting the back edge, and insert the front edge of
the stand into the groove on the piano. Lift the front edge up out of the
groove and tilt the music stand back to lower it down into the top of
the piano.

When lowering the stand, please hold it with both hands.

Advertising
Ce manuel est liée aux produits suivants: