Installation requirements, Tools and parts – KITCHENAID KBNU367TSS Manuel d'utilisation

Page 5

Advertising
background image

5

INSTALLATION REQUIREMENTS

Tools and Parts

Gather the required tools and parts before starting installation. Read and follow the instructions provided with any tools listed here.

20 lb LP Gas Models

Tools Needed

Parts Supplied

Gas pressure regulator/hose assembly set for 11" WCP LP
gas (attached to manifold).

Rotisserie motor mounting bracket

Rotisserie motor

Rotisserie forks

Rotisserie spit

Smoker box

1 single-prong plug/500 mAmp transformer assembly for the
rotisserie motor

1 single-prong plug/5,000 mAmp transformer assembly for
the grill (power supply)

Convertible regulator set for 4" WCP Natural gas

Conversion kit for Natural gas

LP gas fuel tank tray

1.5 V “D” size Alkaline batteries

Vinyl grill cover

Parts Needed - 20 lb LP gas models

20 lb LP gas fuel tank - approximately 18" (45.7 cm) height
and 12" (30.5 cm) diameter

Natural Gas Models

Tools Needed

Parts Supplied

Convertible regulator set for 4" WCP Natural gas

1 single-prong plug/500 mAmp transformer assembly for the
rotisserie motor (on some models)

1 single-prong plug/5000 mAmp transformer assembly for
the grill (power supply)

1.5-volt “D” size alkaline battery (on some models)

Rotisserie motor mounting bracket (on some models)

Rotisserie motor (on some models)

Rotisserie forks (on some models)

Rotisserie spit (on some models)

Smoker box (on some models)

Parts Needed

Gas line shutoff valve

½" male pipe thread nipple for connection to pressure
regulator

LP gas-resistant pipe-joint compound

CSA design-certified outdoor flexible stainless steel
appliance connector (4-5 ft [1.2-1.5 m]) or rigid gas supply
line as needed

Tape measure

Small, flat-blade screwdriver

Flat-blade screwdriver

#2 and #3 Phillips screwdriver

Level

Wrench or pliers

Pipe wrench

Scissors or cutting pliers
(to remove tiedowns)

Noncorrosive leak-
detection solution

Tape measure

Small, flat-blade screwdriver

Flat-blade screwdriver

#2 and #3 Phillips screwdriver

Level

Wrench or pliers

Pipe wrench

Scissors or cutting pliers
(to remove tiedowns)

Noncorrosive leak-
detection solution

Advertising
Ce manuel est liée aux produits suivants: