KITCHENAID KBNU367TSS - Manuel (Page 33)

33
OUTDOOR GRILL CARE
Changing the Light Bulb
Style 1
1. Unplug grill or disconnect power.
2. To remove glass light cover, remove screw and pull out light
assembly.
3. To remove the glass cover, gently pry apart the glass cover
and the light housing using a flat-blade screwdriver between
the glass cover and the clip.
4. Loosen the 2 screws in the bulb socket and pull out the bulb.
5. Replace bulb with a new 12-volt, 25-watt maximum, halogen
bulb, using a tissue or wearing cotton gloves to handle the
bulb. To avoid damaging the bulb, do not touch the bulb with
bare fingers.
6. Tighten the 2 screws in the bulb socket.
7. Replace glass light cover by placing the cover into the clips
and snapping into the light housing. Replace and tighten the
screw.
8. Plug in grill or reconnect power.
Style 2
1. Unplug grill or disconnect power.
2. To remove glass light cover, remove screw and gently pry
downward with a small flat-blade screwdriver at the left edge
of the cover near the screw, and pull away from the retainer.
3. Remove bulb from socket.
4. Replace bulb with a new 12-volt, 10-watt maximum, halogen
bulb, using a tissue or wearing cotton gloves to handle the
bulb. To avoid damaging the bulb, do not touch the bulb with
bare fingers.
5. Replace glass light cover by placing end without clip into the
clip mounted on the grill. Snap the screw end into place and
tighten the screw.
6. Plug in grill or reconnect power.
Replacing the Batteries
(on some models)
Follow these directions if the batteries need to be replaced.
1. Open the outer cover of the battery compartments, located
on the left side of the control panel.
2. Open the inner battery compartment. Remove battery.
A. Screw
B. Light assembly
A. Clip
A. Screws
A
B
A
A
A. Screw
A. Outer battery compartment cover
B. Inner battery compartment covers
A. Outer battery compartment cover
B. 1.5-volt “D” size batteries
C. Inner battery compartment cover
A
A
B
B
A
B
C