Warning, Freestanding refreshment center – KITCHENAID KFFU271TSS Manuel d'utilisation

Page 5

Advertising
background image

5

10. Attach the plastic cold water hose from the water inlet

connection to the inlet side of the filter. Use NSF or UPC
listed water connection line for water supply to inlet
connector. Potable water supply system must be connected
to inlet connector according to local code requirements.

11. Unwrap the sliding cover and place into frame on top of the

ice bin.

Freestanding Refreshment Center

Use a certified plumber to connect and install potable water
supply and drain system to outdoor refreshment center
according to local code requirements.

1. Check that you have adequate drain connections for the

refreshment center.

2. Remove the faucet from the ice bin.

3. Install the faucet and securely fasten.

4. Connect the plastic line from the water filter to the faucet

connection and securely tighten.

5. Install water inlet connection through hole provided in cabinet

rear panel.

6. Attach the plastic cold water hose from the water inlet

connection to the inlet side of the filter. Use NSF or UPC
listed water connection line for water supply to inlet
connector. Potable water supply system must be connected
to inlet connector according to local code requirements.

7. Unwrap the sliding cover and place into frame on top of the

ice bin.

8. Rotate the side shelves up into their locked position or leave

down as needed.

9. Lock the front locking caster wheels to keep refreshment

center from moving.

A. Plastic hose
B. Inlet connector

C. Filter
D. NSF or UPC listed water supply line or hose

A. Faucet
B. Brass escutcheon with “O” ring

C. Sink
D. Plastic washer

E. Locking nut

A

B

C

D

WARNING

Excessive Weight Hazard

Use two or more people to move and install
refreshment center.

Failure to do so can result in back or other injury.

A

B

C

D

E

A. Plastic tube insert
B. Plastic ferrule

C. Compression nut
D. Plastic hose

E. Filter

A. Tubing from water filter (inlet)
B. Hose connector

C. Hose connector nut

D. Brass locking nut

E. Inlet connector
F. Exterior side of mounting panel

A. Plastic hose
B. Inlet connector

C. Filter
D. NSF or UPC listed water supply line or hose

D

E

A

B

C

A

B

C

E

D

F

A

B

C

D

Advertising
Ce manuel est liée aux produits suivants: