Using surround sound, Selecting the center mode, Adjusting the speaker volume – Sony STR-GA7ES Manuel d'utilisation

Page 18

Advertising
background image

Using Surround Sound

18

EN

Selecting the center mode

The receiver offers you four center modes:
PHANTOM, 3 CHANNEL LOGIC, NORMAL, and
WIDE. Each mode is designed for a different speaker
configuration. Select the mode that best suits your
speaker system configuration.

1

Press SOUND FIELD ON/OFF to turn on the
sound fields.

2

Press GENRE to select the PRO LOGIC sound
field.

3

Press CTR MODE repeatedly until the center
mode you want appears in the display. Select the
center mode by referring to the following chart.

Getting the Most Out of Dolby
Pro Logic Surround Sound

To obtain the best possible Dolby Pro Logic Surround
sound, first select the center mode according to your
speaker system. Then, adjust the sound parameters of
the PRO LOGIC sound field.

Note that you must have at least one additional pair of
speakers and/or one center speaker to do the following
adjustments.

DPC

MODE

MODE

GENRE

SURROUND

indicator

LEVEL

PARAMETER

CENTER
LEVEL (+/–)

TEST TONE

DIGITAL

PROCESSING

CONTROL

DPC MODE

MODE

GENRE

If you have

Front and rear
speakers, no
center speaker

Front and center
speakers, no rear
speaker

Front and rear
speakers, and a
small center
speaker

Front and rear
speakers, and a
center speaker
equivalent to your
front speakers

So that

The sound of the
center channel is
output from the front
speakers.

The sound of the rear
channel is output
from the front
speakers.

The bass sound of the
center channel is
output from the front
speakers (because a
small speaker cannot
produce enough
bass).

For “complete”
Dolby Pro Logic
Surround sound.

Select

PHANTOM

3 CH LOGIC
(3 Channel
Logic)

NORMAL

WIDE

Adjusting the speaker volume

The test tone feature lets you set the volume of your
speakers to the same level. (If all of your speakers have
equal performance, you don’t have to adjust the
speaker volume.)

Using the controls on the remote lets you adjust the
volume level from your listening position.

1

Press TEST TONE on the remote.
You will hear the test tone from each speaker
sequentially.

SOUND FIELD

ON/OFF

SOUND FIELD

ON/OFF

REAR
LEVEL (+/–)

CTR MODE

0

)

=

+

9

(

p

P

r

Advertising
Ce manuel est liée aux produits suivants: