Samsung BD-C5500T - Manuel (Page 27)

English

04
Connections
Wireless Network
You can connect to network with a Wireless IP sharer.
A wireless AP/IP router is required to make a wireless network connection. Connect the wireless
LAN adapter to the Wireless LAN Adapter on the rear panel of the player.
Set the network options. (See pages 36~39)
NOTE
Use only the optional Samsung wireless LAN adapter with this player. (Model name: WIS09ABGN).
Do not use this adapter with any other third-party products.
Please contact the retailer of this player for purchasing the wireless LAN adapter.
You must use a wireless IP sharer that supports IEEE 802.11 a/b/g/n. (n is recommended for stable operation of the
wireless network.)
Wireless LAN, by its nature, may cause interference, depending on the use condition (AP performance, distance,
obstacles, interference by other radio devices, etc).
Set the wireless IP sharer to Infrastructure mode. Ad-hoc mode is not supported.
When applying the security key for the AP (wireless IP sharer), only the following is supported.
Authentication Mode : WEP, WPAPSK, WPA2PSK
Encryption Type : WEP, TKIP, AES
For the AllShare function, a PC must be connected in the network as shown in the figure.
1.
2.
✎
▪
▪
▪
▪
▪
1)
2)
▪
Wireless IP sharer
Wireless LAN Adapter
(not included)
Networking with PC for
AllShare function
(See pages 55~56)
Broadband
service
01854B-BD-C5500-XAC-ENG.indb 27 2010-01-18 오후 4:05:08