Sun Microsystems SUN BLADE X6250 - Manuel (Page 28)

20 Sun Blade X6250 Server Module Windows Operating System Installation Guide • September 2008
JavaRConsole System Requirements
The requirements for the JavaRConsole system are:
■ Solaris, Linux, or Windows operating system is installed.
■ The system must be connected to a network that has access to the Sun Blade
server module Ethernet management port.
■ Java Runtime Environment (JRE) 6.0 or later is installed.
■ If the JavaRConsole system is running on Solaris, volume management must be
disabled for JavaRConsole to access the physical floppy and/or CD/DVD-ROM
drives.
■ If the JavaRConsole system is running on Windows Server 2003 or Windows
Server 2008, Internet Explorer Enhanced Security must be disabled.
■ The JavaRConsole system and ILOM or ELOM service processor has been set up.
Setting Up the JavaRConsole System
This section describes how to setup the JavaRConsole system to deliver the mass
storage drivers and operating system distribution media during a remote Windows
installation. Follow the instructions that match your server’s configuration:
■ “To Set Up the JavaRConsole System for Servers With ILOM” on page 20
■ “To Set Up the JavaRConsole System for Servers With ELOM” on page 25
▼ To Set Up the JavaRConsole System for Servers
With ILOM
This section describes how to setup the JavaRConsole system using ILOM to deliver
the mass storage drivers and Windows operating system distribution media during a
remote Windows installation.
Note – This procedure assumes that the JavaRConsole system and ILOM service
processor have been set up according to the instructions in the Integrated Lights Out
Manager (ILOM) Administration Guide for your Sun Blade server module.