Sony AVD-S50 - Manuel (Page 60)

60 GB
RADIO SHACK 23, 30
RCA 22, 26
SABA 45, 46
SAMPO 28
SAMSUNG 18, 33, 49, 50
SANYO 07, 15, 27, 52
SCOTT 28
SEARS 03, 26, 27
SHARP 08, 16, 21, 23
SONY 01 (default), 12
SYLVANIA 25, 28
TEKNIKA 21, 25, 30
TELEFUNKEN 53
THOMSON 55
TOSHIBA 03, 54
WARDS 21, 22, 28
YORX 28
ZENITH 31
Controlling the TV
You can control your TV using the buttons
below.
By pressing You can
TV [/1 Turn the TV on or off.
TV/VIDEO Switch the TV’s input source
between the TV and other input
sources.
TV VOL +/– adjust the TV volume.
TV CH +/– change the TV channel.
WIDE change the aspect ratio of your
TV.
Note
Depending on the TV, you may not be able to control
your TV or to use some of the buttons above.
Controlling satellite receivers with
the remote
Note
For datails about buttons that can operate the satellite
receiver, see page 61.
1
Press AV [/1 and RM SETUP
simultaneously.
The SETUP indicator lights up.
2
Enter your manufacturer’s code (see the
table) using the number.
The SET UP indicator flashes twice.
Code numbers of controllable
satellite receiver
If more than one code number is listed, try
entering them one at a time until you find
the one that works with your satellite
receiver.
Manufacturer Code number
SONY 61, 62, 63, 64
RCA 65, 79
JERROLD/GI 66, 67, 68, 69, 70, 71, 72,
73, 74
SATLANTA 75, 76, 77
PANASONIC (MATSUSHITA) 78
TV ? / 1
Number
buttons
AV ? / 1
RM SETUP
SAT