Sony PEGA-WL110 - Manuel (Page 16)

16 US
Tip
Tapping the mark in the top right-hand corner of the screen shows a
brief explanation of the settings.
7
Enter a profile name in [ProfileName].
Specify a name freely according to the name of the other
communication device, Wireless LAN access point, etc.
8
Enter a network ID in [NetworkID (SSID)].
Network ID (SSID) depends on the Wireless LAN access point
you are using. Make sure you enter the network ID (SSID) that is
specified by your Wireless LAN access point.
Note
The Network ID is case-sensitive. Be careful when entering a Network ID.