Sharp MD-MT99C - Manuel (Page 45)

ENGLISH
01/4/26 99secl_E_6.fm
E-44
Ref
e
rences
-E
rr
or M
ess
a
g
es-
Number or symbol appears in (*) position.
ERROR MES-
SAGES
MEANING
NO SIGNAL z Poor connection of the digital cable.
z No output signal comes out from the
connected unit to playback.
(Use the AC power for the connected
unit.)
z The input signal has improper sam-
pling frequency.
NOT PLAY z You tried to play back a track that can-
not be played with this equipment.
PLAY MD z You recorded on a playback-only disc.
POWER ? z Improper power is being supplied.
PROTECTED z The write protection tab of a MiniDisc
is set to the protected position.
z You tried to record on a playback-only
disc.
SORRY z Since a track number is currently be-
ing located or updated, the unit cannot
accept your command.
(Wait for a whilst and try the operation
again.)
ERROR MES-
SAGES
MEANING
TEMP OVER z The temperature is too high.
(Turn off the power, and wait for a whilst.)
TOC FORM
(**) z There is an error in the recording sig-
nal.
(Erase all of the tracks, and then record
again.)
TOC FULL z There is no space left for recording
character information (track names,
disc names, etc.).
Tr. Protect z The track has been protected from be-
ing erased.
(Edit the track with the device on which it
was recorded.)
? DISC z A disc which contains data other than
music was played.
(A disc which contains nonmusic data
cannot be played.)
z There is an error in the signal recorded
on the disc.
MD-MT99C