Sharp MD-MT99C - Manuel (Page 29)

ENGLISH
01/4/26 99secl_E_4.fm
E-28
U
seful Feat
ure
s
-Chec
k
ing Displa
ys-
„ To display the playing time of an individual
track „ Checking the remaining amount of battery
level
The remaining amount of battery level is shown by the
battery indicator (
) during operation.
z When the battery is completely discharged, the bat-
tery indicator will flash. Recharge the battery or
replace the alkaline battery with a new one.
z When the battery has run completely out, "BATT
EMPTY" will appear. Then, the power will be discon-
nected automatically.
Notes:
z If you use the battery which you stopped charging
halfway, "
" may appear. It does not mean that the
battery is completely charged.
z The battery indicator will not correctly display the
remaining capacity for approximately 10 seconds after
the power has been turned on.
z When the AC adaptor or a separately available car
adaptor is used, the battery indicator will not be
shown.
z The number of bars shown in the battery indicator may
increase or decrease, depending on the operation
being performed. This is normal.
1
Whilst in the stop mode, press the or but-
ton to display the track number and track name.
Track number
Track name
2
Press the DISP button to display the playing
time for that track.
Playing time
Each time the or button is pressed, the play-
ing time of the previous or next track will be dis-
played.
MD-MT99C