Sony TA-P9000ES - Manuel (Page 6)

6 GB
Hooking Up the Components
Power Amplifier Hookups
Connect the rear, center, and front input jacks on your five
channel power amplifier (Sony TA-N9000ES etc.) to the
pre amplifier’s PRE OUT jacks. For details, see the
operating instructions supplied with your power
amplifier.
Connect a powered sub woofer to either of the PRE OUT
WOOFER jacks. The same signal is output from both PRE
OUT WOOFER jacks.
Required cords
Audio cords (3 cords are supplied)
When connecting a cord, be sure to match the color-coded pins to
the appropriate jacks on the components.
Monaural audio cords (not supplied)
For the PRE OUT CENTER and PRE OUT WOOFER jacks.
Black Black
z When making woofer and center channel connections
You can use one set of pins (e.g., red) on the audio cord (not
supplied) to connect the CENTER jacks and the other set (e.g.,
white) to connect the WOOFER jacks.
White (L) White (L)
Red (R) Red (R)
Active Woofer
TA-N9000ES etc.
TA-P9000ES
INPUT
AUDIO
IN
FRONT SPEAKERS
INPUT S-LINK OPERATION
REAR SPEAKERS CENTER SPEAKER SPEAKER IMPEDANCE
+ –
R
+ –
R
– +
L
– + – +
L
R L R L R L
CTRL A1
Make sure to power off
when switching
NORMAL BTL
REAR CENTER FRONT EXTRA 2CH
NORMAL
USE
4 Ω MIN
BTL
USE
8 Ω MIN
NORMAL
USE
8 Ω MIN
BTL
USE
16 Ω MIN
( + )
( – )
BTL
( + )
( – )
BTL
PRE OUT
WOOFER
FRONT REAR CENTER
L
R
INPUT 1
WOOFER
FRONT REAR CENTER
L
R
INPUT 2
WOOFER
FRONT REAR CENTER
L
R
BYPASS 5.1ch
WOOFER
FRONT REAR CENTER
L
R
BYPASS 2ch
L
R
CTRL A1
TO POWER AMP