Insignia ns-cl15c - Manuel (Page 17)

17
Insignia NS-CL15C 15" Combo DVD/LCD TV
www.insignia-products.com
Changing DVD settings Troubleshooting
Please check the following items before asking
for repair service:
On-screen
menu
Options
GENERAL SETUP TV DISPLAY–Sets the aspect ratio of the TV
display.
• 4:3/PS (Pan and Scan - may be used
with external TVs) Widescreen images
are shown on the screen, but with some
parts automatically cut off the ends.
• 4:3/LB (Letter Box - use with internal
TV) Widescreen images are shown on
the screen with black bars on the top
and bottom of the screen.
• 16:9 (may be used with external TVs)
Widescreen images fill the entire
screen.
ANGLE MARK–Lets you turn the Angle option
On or Off. If you set this to On, you can use the
ANGLE button on the remote to select an
alternate viewing angle on the DVD.
OSD Lang.–Lets you select the language for
the On Screen Display (OSD).
CAPTION–Lets you turn the caption On or Off.
SCREEN SAVER–Lets you turn on the screen
saver, which displays when the DVD player is
idle for more than three minutes.
Hdcd–Lets you set Hdcd to "OFF","1X","2X" to
switch the CD play mode between "Normal
CD","HDCD with 44.1K","HDCD with 88.2K". You
can play normal CDs when "HDCD" is set to off.
You can play 44.1K CDs when HDCD is set to
1X, and 88.2K CDs when HDCD is set to 2X to
enhance the audio quality.
Last Memory–Lets you turn the last memory
option On or Off. When set to On, the DVD
player remembers the chapter that you were
viewing when you turn the DVD player off and
starts the DVD at that chapter when you turn
the DVD player back on.
PREFERENCE
(only available
when no disc is in
the player) PARENTAL–Lets you set Parental Controls for
watching DVDs. Initial password is 1234
Options include:
• Off
• 1 Kid Saf
• 2 G
• 3 Pg
• 4 Pg 13
• 5 Pgr
• 6 R
• 7 Nc 17
• 8 Adult
PASSWORD CHANGE–Lets you change the
password used to set or change Parental
Controls. The initial password is 1234. Use the
number buttons to enter, then confirm the new
password.
Note: If you forget your password, enter 1369.
DEFAULT–Resets all settings (except Parental
Controls and the password) to factory default.
Press ENTER to confirm.
Problem Solution
No picture or
sound. Check all cable connections.
Make sure that the TV is plugged in and turned
on.
Make sure that electricity is available at the AC
power outlet.
Picture is OK, but
no sound. Check the volume level and mute settings.
Switch to another channel to determine if the
station is the problem.
No picture Make sure that the TV is working properly.
Press the INPUT button to select TV input.
Make sure the color system is set correctly.
Sound is OK, but no
color. Check the color control and adjust it.
Check the program’s color features, because it
may be a black and white movie.
The picture has
overlapped images. Make sure that the antenna is installed
correctly. If not, adjust the antenna toward the
broadcasting station.
Picture has “snow.” Check the antenna and its connection. If there
are problems, correct them. If all connections
are tight, the problem may be with a faulty
antenna or cable.
Check whether car traffic or neon signs
disturb the image.
Stripes on picture. Check for interference from other electronic
devices, such as radios and televisions, and
keep magnetic or electronic devices away
from the TV.
Bad stereo or SAP
sound. Long distance from the station or interfering
radio waves can result in bad sound reception.
If so, change the mode to Mono.
Remote control
does not work. Point the remote control at the TV’s IR sensor.
Change the batteries in the remote control.
Remove any obstacles between the TV’s IR
sensor and the remote control.
Image is not clear. Adjust the NOISE REDUCTION.
Image is not
centered. Adjust the Horizontal or Vertical control.
Bad sound quality Make sure that the audio output mode is set
correctly.
Make sure that the audio connection between
the unit and amplifier (if used) is secure.
Disc cannot be
played Make sure the disc is inserted with the label
facing forward.
Clean the disc.
Moisture has condensed in the player.
Remove the disc and leave the player on for
about an hour.
The player doesn’t
operate normally Disconnect the power plug for ten seconds,
then reconnect it.
If the problem persists, contact Insignia or
your dealer for help.