Melitta MEPE123B - Manuel (Page 11)

11
Care and Cleaning Instructions
Before cleaning or removing parts, unplug the machine and allow to
cool completely.
Hint: When the Overflow Tray is full, the red flag will pop up to
alert you it needs to be emptied. Make sure the machine is
fully cooled. Simply pull tray straight out and pour out into
your sink until it is empty. Clean and slide back into machine
securely.
Used Pod
Container
DISPOSE OF USED COFFEE PODS AFTER EVERY DAY’S USE.
The Used Pod Container slides out easily so you can dispose of
the used pods in your garden (they’re biodegradable) or in a
waste receptacle.
1. The Detachable Water Tank, Water Overflow Tray and Cup Rest
Grill can be washed in hot, soapy water. Rinse and use a soft cloth
to dry.
2. Wipe down the external parts with a soft cloth or sponge. Do not
use harsh abrasive cleaners or brushes as they may scratch the
surface.
3. Occasionally the Infusion System will need to be brushed out. Lift
Hood and gently brush coffee grounds out from the housing. A soft
toddler’s toothbrush is ideal for this purpose.
4. If the Steam Nozzle/Frothing Attachment is used, remove frothing
attachment and separate frothing tip from frothing attachment by
turning counter-clockwise. Wash in hot, soapy water. Rinse by
running water over and through both pieces and dry. Replace tip
back on to attachment by turning clockwise. Place Steam Nozzle
in position with the small pressure relief hole turned towards the
machine.