Maytag 6 915555 B - Manuel (Page 4)

3
Lower Rack
A variety of large items such as dinner plates, mixing bowls, pots and pans and baking dishes can be loaded in this rack.
3 saucers
are loaded
on the rack
under the
Stack-Rack
Shelf
With the Stack-Rack shelf (select models) raised, thin
items like cookie sheets or pizza pans may be placed
along the left side. With the shelf down, two levels of
glasses and cups can be loaded.
Back
Back
Tall items such as bakeware and large platters can be
placed on the left side or across the back of this rack.
10 Place Settings
Removing the Upper Rack
The upper rack can be removed when tall or oversized
items need to be loaded into the lower rack.
Note: Avoid resting items over the center wash tower.
To remove:
• Roll the upper rack 1/3 to 1/2 of the way out.
• Remove the plastic rack stop from the end of each
track. To remove each plastic rack stop, push in-
ward (towards the rack) on the ridged area of the
rack stop. The rack stop will snap open and can be
easily removed by pulling straight out. Take care to
support the track while removing rack stops.
• Roll the rack all the way out of the track and remove
from the dishwasher.
• Reverse the above procedure to replace the upper
rack into the dishwasher.
Loading
(continued)
Rack
Stop
Positioning Fold-Away ™ tines (select models) flat in the
right rear corner, provides convenient loading space for
large, bulky items.