Maytag W10312956A - SP - Manuel (Page 9)

9
Small loads and Small Load High 18 Wrinkle Prevent † For small loads of 3-4 items.
sportswear Medium-High
Medium
Low
Extra Low
Air Only
Any load Timed Dry High 40 Wrinkle Prevent † Use to dry items to a damp level for items that do
NOTe: Select Air Medium-High not require an entire drying cycle, or to finish drying
Only to dry foam, Medium slightly damp items. Select a drying temperature
rubber, plastic, or Low based on the type of fabrics in your load. If you are
heat-sensitive Extra Low unsure of the temperature to select for a load,
fabrics. Air Only select the lower setting rather than the higher setting.
items to dry: Cycle:
drying
Temperature:
default
Time:
Available
Options: Cycle details:
CYCLE GUIDE — STEAM CYCLES
Settings and options shown in bold are default settings for that cycle.
Not all settings and options are available on each cycle.
Steam cycles are designed for use with dry loads to loosen wrinkles, reduce odors, and refresh fabrics.
CYCLE GUIDE — TIMED CYCLES
Settings and options shown in bold are default settings for that cycle.
Not all settings and options are available on each cycle.
Selecting the drying Temperature
A High heat setting may be used for drying heavyweight
items such as towels and work clothes.
A Low to Medium heat setting may be used for drying
medium-weight items such as sheets, blouses, dresses,
underwear, permanent press fabrics, and some knits.
Use a no heat (air dry) setting for foam, rubber, plastic,
or heat-sensitive fabrics.
Line dry bonded or laminated fabrics.
NOTe: If you have questions about drying temperatures
for various loads, refer to the care label directions.
Adjusting drying time on Timed Cycles
When you select a Timed Cycle, the default time appears in
the display. Use the LCD controls to increase or decrease the
time in 1 minute increments. Press and hold to change the
time in 5 minute increments.
The maximum dry time is 100 minutes.
† Wrinkle Prevent ™ with Steam option is available only with High, Medium-High, and Medium Drying Temperature settings.
† Wrinkle Prevent ™ with Steam option is available only with High, Medium-High, and Medium Drying Temperature settings.
Mixed loads Custom Medium-High 15 Wrinkle Prevent † Use to reduce wrinkles from dry items, including
Refresh Reduce Static loads left in the dryer too long. For larger loads,
(on some you may add additional time up to 50 minutes in
models) 5 minute increments using the Timed Dry adjust
buttons. Do not add dryer sheets.
Shirts, blouses, Auto High 22 Wrinkle Prevent † Use to reduce odors and light wrinkles from small
and slacks Refresh Medium-High Reduce Static to medium-sized loads of dry items. Dry time will
Medium automatically adjust when the load size is sensed.
Cycle run time cannot be manually adjusted.
Temperature is selectable. Do not add dryer sheets.
items to
refresh: Cycle:
drying
Temperature:
default
Time:
Available
Options: Cycle details: