Maytag W10312956A - SP - Manuel (Page 15)

15
1.
Press leArN MOre
With the dryer on, press LEARN MORE to access the built-in
troubleshooting feature. Use the LCD control buttons to select
TROUBLESHOOTING.
USING THE BUILT-IN TROUBLESHOOTING FEATURE
2.
Select TrOUbleSHOOTiNG
Then use the LCD control buttons to select the desired
troubleshooting topic. The
and buttons can be used to
advance through the different options.
First try the solutions suggested here or visit our website at www.maytag.com/help
for assistance and to possibly avoid a service call.
if you experience Possible Causes Solution
Door not closed completely. Make sure the dryer door is closed completely.
Press and hold the START/PAUSE button 2-5 seconds.
Household fuse is blown or circuit
breaker has tripped.
There may be 2 household fuses or circuit breakers for the
dryer. Check that both fuses are intact and tight, or that both
circuit breakers have not tripped. Replace the fuse or reset the
circuit breaker. If the problem continues, call an electrician.
TROUBLESHOOTING
Dryer will not run
START/PAUSE button not pressed
firmly or held long enough.
dryer Operation
Incorrect power supply. Electric dryers require 240-volt power supply.
Check with a qualified electrician.
Wrong type of fuse. Use a time-delay fuse.