Monster Power Monster Power PRO 3600 - Manuel (Page 26)

18
TROUBLESHOOTING
Symptom Possible Cause Remedy
Component is
not receiving power. The component is plugged into a switched outlet
and the PRO 3600 PowerCenter has not been
turned On. • Turn the PRO 3600 PowerCenter On.
• Or, plug the component
into an Unswitched outlet.
The PRO 3600 PowerCenter is plugged into a
Switched outlet, but power on the component is
not On. In some instances, a component plugged
into a switched outlet won’t receive power
when the PRO 3600 PowerCenter is turned On
unless the component power is also switched On. • Turn the component power On.
Speakers emit
a humming
or buzzing noise. The PRO 3600 PowerCenter is sharing AC power
with equipment that is not properly grounded. • Connect your PRO 3600 PowerCenter
to a dedicated outlet.
• Try unplugging different components
from the PRO 3600 PowerCenter
one at a time to see if the noise stops.
If a component is discovered to be
improperly grounded, attach a copper
wire from the component’s chassis
to the PowerCenter’s grounding post.