Care and cleaning, Caring for the dishwasher – GE Profile 165D4700P388 Manuel d'utilisation

Page 18

Advertising
background image

Caring for the dishwasher.

Cleaning the Control Panel

To clean the control panel, use a lightly dampened
cloth. Then dry thoroughly.

Check the air gap any time your
dishwasher isn’t draining well.

An air gap protects your dishwasher against water
backing up into it if a drain clogs. The air gap is not
a part of the dishwasher. It is not covered by your
warranty. Not all plumbing codes require air gaps,
so you may not have one.

The air gap is easy to clean.

Turn off the dishwasher and lift off the cover.

Remove the plastic cap and clean with
a toothpick.

2

1

Air gap

Does Your Dishwasher Have an Air Gap?

If your dishwasher is left in an unheated place during
the winter, ask a service technician to:

Cut off electrical power to the dishwasher.
Remove fuses or trip circuit breaker.

Turn off the water supply and disconnect the
water inlet line from the water valve.

Drain water from the water inlet line and water
valve. (Use a pan to catch the water.)

Reconnect the water inlet line to the water valve.

4

3

2

1

Protect Against Freezing

O

p

e

ra

ti

n

g

In

st

ru

c

ti

o

n

s

S

a

fe

ty

In

st

ru

c

ti

o

n

s

C

o

n

su

m

e

r

S

u

p

p

o

rt

T

ro

u

b

le

sh

o

o

ti

n

g

T

ip

s

18

Cleaning the Exterior Door Panel

Before cleaning the front panel, make
sure you know what type of panel you have. Refer
to the last two letters of your model number. You
can locate your model number on the left-hand tub
wall just inside the door. If your model number ends
with BB, CC, WW, SA or BG, then you have a painted
door panel. If your model number ends with SS, then
you have a Stainless Steel Door panel. If your model
number ends with CS, then you have a CleanSteel
panel.

Follow the instructions below for cleaning the door
panel for your specific model.

Painted Door Panel (model numbers ending in
BB–black, CC–bisque, WW–white, SA–silver metallic
or BG–graphite black)

Use a clean, soft, lightly dampened cloth, then dry
thoroughly. You may also use a good appliance wax
or polish.

Stainless Steel Door Panel (model numbers ending
in SS)
The stainless steel panels can be cleaned with
Stainless Steel Magic or a similar product using a
clean, soft cloth. Do not use appliance wax, polish,
bleach or products containing chlorine on Stainless
Steel doors.

You can order Stainless Steel Magic #WX10X15
through GE Parts by calling 800.626.2002.

CleanSteel Door Panel (model numbers
ending in CS)
Use a clean, soft, lightly dampened cloth, then
dry thoroughly. Do not use appliance wax, polish
or any chemical agent on CleanSteel doors.

Do not wipe the dishwasher with a soiled dish
cloth or wet towel. These may leave a residue.
Do not use scouring pads or powdered cleaners
because these products can scratch the finish.

Advertising