Fujioh BUF-02 - Manuel (Page 9)

9
INSTALLATION (continued)
2 Remove 4 screws which are fixed to the front cover. The front cover swings open
90° as shown in Fig.
CAUTION
Do not detach the front cover from the range hood unit. The hinge may be damaged.
3 Align 4 screw holes of the liner and range hood unit, then fix securely using the
supplied screws and nuts.
NOTE
Fasten all screws and nuts evenly.
4 Make the duct joint secure and air tight
using non-flammable tape such as duct
tape, etc. (not supplied)
NOTE
Make sure that the shutter installed in
the exhaust pipe moves freely.