Fujioh BUF-02 - Manuel (Page 12)

12
4. FINAL ASSEMBLY AND CHECK
One 40 W light bulb (not supplied) can be mounted to this range hood.
Prior to final assembly, install a light bulb (ordinary type, in the base diameter
17 mm: intermediate base), rated 120 V-40 W or below.
1 Assembly
Replace the front cover with 4 screws.
CAUTION
To prevent the screw holes from being damaged, be sure to tighten the screws with
the torque of 13 inch-lbs. (1.5 N-m) or less.
2 Check
(1) Turn on the electrical circuit to the range hood.
(2) Make sure that the switch and light operate correctly. Refer to page 4 of the
Operation Manual.
(3) Check the ventilating functions at Hi, Me and Lo positions.
(4) Make sure that the range hood has no abnormal noises and/or vibration.
INSTALLATION (continued)
CAUTION
• To reduce the risk of injury, keep your hands and other objects away from the fan
while it is in motion.
• Wear working gloves to avoid injury.