Double insulated tools: tools with two prong plugs, Extension cords – Harbor Freight Tools 41983 Manuel d'utilisation

Page 7

Advertising
background image

Page 7

SKU 41983

for technical questions, please call 1-800-444-3353.

Your tool must be plugged into an appropriate outlet, properly installed and grounded in
accordance with all codes and ordinances. The plug and outlet should look like those in
the following illustration.

(See figure A.)

figuRE A

figuRE b

DOublE inSulATED TOOlS: TOOlS wiTH TwO pROng plugS

note: This tool has a two-prong plug.

Tools marked “Double Insulated” do not require grounding. They have a special double
insulation system which satisfies OSHA requirements and complies with the applicable
standards of Underwriters Laboratories, Inc., the Canadian Standard Association, and the
National Electrical Code.

(See figure b.)

Double insulated tools may be used in either of the 120 volt outlets shown in the preceding
illustration.

(See figure b.)

ExTEnSiOn cORDS

Grounded tools require a three wire extension cord. Double Insulated tools can use either
a two or three wire extension cord.

As the distance from the supply outlet increases, you must use a heavier gauge extension
cord. Using extension cords with inadequately sized wire causes a serious drop in voltage,
resulting in loss of power and possible tool damage.
(See figure c, next page.)

The smaller the gauge number of the wire, the greater the capacity of the cord. For example,
a 14 gauge cord can carry a higher current than a 16 gauge cord.
(See figure c.)

When using more than one extension cord to make up the total length, make sure each
cord contains at least the minimum wire size required.

(See figure c.)

If you are using one extension cord for more than one tool, add the nameplate

amperes

and use the sum to determine the required minimum cord size.
(See figure c.)

If you are using an extension cord outdoors, make sure it is marked with the suffix “W-A”
(“W” in Canada) to indicate it is acceptable for outdoor use.

3.

1.

2.

1.

2.

3.

4.

5.

6.

Advertising