Harbor Freight Tools 95020 - Manuel (Page 2)

Page 2 SKU 95020 for technical questions, please call 1-800-444-3353.
specificAtiOns
Electrical Requirements 120 V~, 60 Hz, 2 A
Motor No Load Speed 13,000 RPM
Dust Opening 1 1 /
4
” OD (Dust bag included)
Dimensions 4 1 /
2
” W x 6 7 /
8
” L x 5 3 /
4
” H
Backing Pad Dimensions 4” W x 4 1 /
2
” L
Weight 2 1 /
2
lb.
save this manual
You will need this manual for the safety warnings and precautions, assembly, oper-
ating, inspection, maintenance and cleaning procedures, parts list and assembly diagram.
Keep your invoice with this manual. Write the invoice number on the inside of the front
cover. Keep this manual and invoice in a safe and dry place for future reference.
generAl sAfety rules
wArning!
reAd And understAnd All instructiOns
failure to follow all instructions listed below may result in
electric shock, fire, and/or serious injury.
sAVe tHese instructiOns
wOrk AreA
keep your work area clean and well lit. Cluttered benches and dark areas invite
accidents. Make sure there is adequate surrounding workspace.
do not operate power tools in explosive atmospheres, such as in the pres-
ence of flammable liquids, gases, or dust. Power tools create sparks which may
ignite the dust or fumes.
keep bystanders, children, and visitors away while operating a power tool.
Distractions can cause you to lose control. Protect others in the work area from
debris such as chips and sparks. Provide barriers or shields as needed.
electricAl sAfety
grounded tools must be plugged into an outlet properly installed and grounded
in accordance with all codes and ordinances. never remove the grounding
prong or modify the plug in any way. do not use any adapter plugs. check with
a qualified electrician if you are in doubt as to whether the outlet is properly
1.
2.
3.
1.
e194601
93mA
reV 02/07