Honeywell 34 Inch Indoor Portable Evaporative Air Cooler Instruction Manual - Manuel (Page 2)

6) Casters
7) Ice Compartment Lid
8) Rear Grill
9) Water Level Indicator
10) Remote Control 11) Detachable Water Tank Latch
12) Water Fill Door
13) Drain Plug
14) Water Regulator 1) Control Panel
2) Handle
3) Louvers
4) Water Tank
5) Power Cord & Plug
PARTS DESCRIPTION
USE & OPERATION
(1)
(9)
(11)
(12)
(2)
(3)
(13)
(10)
(4)
(6)
(7)
(14)
(8)
(5)
CONTROL PANEL
FUNCTION BUTTONS
POWER
Press the button to turn the unit on. The cooler will start automatically at medium speed. After a few
seconds the speed will switch to low. To turn the unit off, press the button again.
SPEED
Press the SPEED button repeatedly to change the speed between High - Medium - Low.
The indicator light will show the selected speed:
COOL
Press the COOL button until is illuminated on the display screen. This activates
evaporative cooling. The water pump will operate and you will feel the cooler air after the Honeycomb
Cooling Media is completely wet. When the is not illuminated on the display screen, the unit switches
to a fan only mode, without evaporative cooling.
WARNING: Please ensure sufficient water is in the water tank otherwise you may hear a Low Water
Alarm and the cooler will start in a Fan only mode without evaporative cooling.
WARNING -- READ AND SAVE THE AIR COOLER SAFETY & MAINTENANCE GUIDE AND USER MANUAL
BEFORE USING THIS PRODUCT.
FAILURE TO FOLLOW THESE INSTRUCTIONS MAY DAMAGE AND/ OR
IMPAIR ITS OPERATION AND VOID THE WARRANTY. IN CASE THERE IS ANY INCONSISTENCY OR
CONFLICT BETWEEN THE ENGLISH VERSION AND ANY OTHER LANGUAGE VERSION OF THE
CONTENT OF THIS MATERIAL, THE ENGLISH VERSION SHALL PREVAIL.
COOL
SPEED
SLEEP TIMER
SWING
Icons on Display Screen
Low water level in tank
Cool
Fan speed
Sleep
Low speed
Medium speed
High speed
Swing
Timer
High Medium Low
EN 1