Medal Sports 54811 - Manuel (Page 4)

ASSEMBLY INSTRUCTIONS
FIG.1
FIG. 1
3
PRE-INSTALLED PRE-INSTALLED
Find a clean, level place to begin the assembly of your
Combo Game. The table will be assembled upside down
and then turned over. This is a heavy game and turning it
over will require at least two strong adults.
Remove all of the contents from box and verify that you
have all of the listed parts as shown on the Parts List.
Carefully cut or tear the four carton corners so that the
bottom of the box can be used as your work surface.
1
2
3. Attach the Left Legs (#2) and Right Legs (#3) to the Main
Frame (#1) using four Bolts (#6) and four Washers (#7)
per Leg.
4. Attach the Leg End Panels (#4) to the legs using four
Screws (#8) per Leg End Panel.
5. Screw the Leg Levelers (#9) into each leg.
2
4
8
27
26
6
7 7
6
1
3
2
3
2
4
9
26
x 16
x 16
x 1 x2 x2
x8
x2
x4
2 3 6
7 8 9
1 4
x 6 x20 27 26