Auriol Z31482A_B - Manuel (Page 14)

14 GB/IE
sive pad 14 to achieve an optimum level of
adhesion. After installation, do not change the
position of the self-adhesive pad
14 , otherwise
the level of adhesion achieved by the self-
adhesive pad could be reduced.
Q
Temperature memory
j Press the MIN / MAX button 7 to show
the lowest temperature measured indoors,
“IN”
3 , and outdoors, “OUT” 4 .
j Press the MIN / MAX button 7 again to
display the highest measured temperature.
j Press the MIN / MAX button 7 again to
return to the current temperature.
Note: if the MIN / MAX button
7 is
not pressed for 5 seconds, the display
automatically reverts to the current
temperature.
Note: the stored minimum and maximum
temperature is deleted every day at
00:00 hours and measurement begins
again.
39057_aur_Innen-Aussenthermometer_Content_GB_IE_FI_SE_DK.indd 14 15.01.14 14:00