Curtis RWD200 - Manuel (Page 18)

P.18
OPERATING INSTRUCTIONS
“Machine Wash”. Please select the proper washing temperature according to the label
on the articles to be washed. Furthermore, the proper detergent shall be selected for wool
textiles.
Baby Wear: You can choose this procedure to wash children' s underwear.
Speed Wash: This procedure is suitable for washing few and not very dirty clothes quickly.
Sanitary: This cycle is specially set in this machine to clean the drum and tube. It will provide
an extra high temperature sterilization to make the clothes washing more green.
When proper amount of chlorine bleaching agent is put in, the barrel cleaning effect will be
better. The customer can use this procedure regularly according to the need.
NOTE: Do not use this cycle with clothes, and do not add detergent or fabrics softener.If you
use this cycle on a monthly basis, the wash drum will be kept clean.
Rinse ＆ Spin: Select this option to rinse and spin a load separately from a regular cycle.
This can be helpful in preventing fresh stains from setting in fabrics.
Refresh: During this cycle, there is only hot air rather than water ejecting from inside the
drum to wash the clothing. Also it can be used to dry clothes weighs less than 0.5kg.For
a shirt or a short.
Spin:Separate Spin Procedure.Soap water or rinse water shall be drained out before spinning.
Cotton/Normal Dry: This is a normal drying procedure. Moisture content of the clothes after
drying is - 3 % ~ 3 % .The load of drying is not more than 3 . 5kg.
NOTE: The drying time according to the weight.
OPTION BUTTONS
Drying: This option will add a drying cycle to the selected cycle.
Extra Rinse: This option will add an extra rinse cycle to the selected cycle.
My Cycle: When this button is pressed continuously, this cycle will be remembered.
You can quickly choose this cycle only by press this button at the washer next start.
Delay: The delay start light will flash to indicate the delay time.It will start the cycle
after【xx】hours.
Soil level: It’s divided into three levels. Choose the right soil level before the washer started
is necessary.
Spin speed: The washer drum spin at up to 1 2 0 0RPM. This reduces drying time and saves
energy. Press the SPIN SPEED button until the indicator light for the desired setting is lit.
Some fabrics, such as delicates, require a slower spin speed.
Temp.: Press this button to select the temperature you need.And here are four temperature
can be selected.
Pre-wash: Select this option to add a prewash and spin cycle to the chosen cycle.
This is especially useful for heavily soiled items.
Note:
When choose the drying cycle, it can be achieved by cooling water.
Pre-wash Wash Rinse Spin Drying