Curtis RLDED3258A-B - Manuel (Page 29)

28
Problems Solutions
TV CHANNELS
ARE BLOCKED
Check your auto lock function’s settings inside the OSD. You may have locked
up some channels but forgot about them.
UNIVERSAL
REMOTE CODE
This TV follows NEC’s universal remote code. Please check your hand book
for NEC’s codes then apply them.
THE TV TURNS
ON OR OFF
SLOWLY AND
THE SCREEN
SHOWS UP
SLOWLY
This TV is a High Definition liquid crystal display panel TV. It requires a few
more seconds than normal TVs to power up and show the picture.
NO SOUND ON
PC
Make sure you have a 3.5 mm mini-jack cable connected from your pc’s sound
output to the TV’s VGA STEREO INPUT.
HDCP VIDEO
SAYS NO HDCP
SUPPORT
Reboot your HDCP video device but turning them off and unplugging the power
cord. Wait up to 8 minutes to plug the power back in to see if it works or not.
HDCP VIDEO
HAS NO AUDIO
Make sure you have a 3.5 mm mini-jack cable connected from your HDCP video
device’s sound output to the TV’s VGA STEREO INPUT. If your HDCP video
device uses RCA AUDIO jacks, you’ll need to obtain a RCA audio converted
into 3.5 mm mini-jack cable.
CANNOT GET
1360X768 ON PC
VGA
Make sure the TV is recognized as plug and play monitor. Try updating your
video card’s drivers as well. If that does not help, most likely you’ll need to
upgrade your video card to a newer one.
PICTURE IS
DISTORTED OR
HAS ABNORMAL
SOUND
This might be from interference from large electrical appliances, cars,
motorcycles, or fluorescent lights. If the TV is close to the wall, try moving the
TV to another room in your house to see if the problem still occurs.
PICTURE DOES
NOT COVER THE
ENTIRE SCREEN
If you’re using HDMI or a TV digital channel make sure you use the ASPECT
button to switch to 16:9 format. If you are using VGA, use the AUTO
ADJUST function to adjust to the screen. Please Note : If you are using regular
analog TV, AV, or component in 480i resolution, use the ASPECT button to
switch to 16:9 in order to fill up the screen. Please Note : This note this feature
will distort the picture.