Epson BrightLink 455Wi - Manuel (Page 26)

26
7. Attaching the Covers
A
Attach the wall plate cover and end cap
(1) Secure the wall plate cover with the two M4 x 12 mm hexagon socket head cap bolts (
A
).
(2) Place the end cap with the concave portion facing up (
B
).
B
Attach the cable cover to the projector
Attach the cable cover and tighten the two screws to secure the cable cover.
q
If the cables are not installed inside the wall, you need to pass them through the
cutouts on each side of the wall plate cover. You may need to enlarge the cutouts to
allow the cables to be passed through.
End cap
Wall plate cover
M4 x 12 mm
hexagon socket head
cap bolts (2)
Cable cutouts
Cable cover
Screws (2)
Only a specialist should remove or reinstall the projector, including for maintenance and
repairs. Refer to the User’s Guide of your projector for instructions on maintenance and repairs.