Danby DPAC7099 - Manuel (Page 7)

6
LCD
Display
Water Full
Indicator
ON/OFF
Switch
EMERGENCY ON/OFF Switch
• This switch is used when unit needs to be
temporarily switched on/off.
• Pressing the emergency will turn on the unit.
The running mode and fan speed mode will be
set automatically.
• Pressing the emergency button again will stop
the unit.
Note: When the unit is on, remember to lift up
the air outlet flap.
WATER FULL INDICATOR
• When illuminated, signifies condensed water
inside the unit can’t be discharged and the
condensation water level has reached full water
level.
• The unit stops operating when this
indicator flashes. After discharging the water,
press the POWER button to restart the unit. The
operating mode will be that which was in
operation before water full indicator illumination.
• LED light colour is RED
LCD DISPLAY
Cooling Mode
Dehumidify Mode
Fan only Mode
Auto Mode
High Fan Speed
Medium Fan Speed
Low Fan Speed
Display set temperature
Display timer setting of auto switch
On/Off
Mode Control
The Mode Control has 4 settings:
• Cool • Dehumidify • Fan • Auto
The settings are adjusted by the Mode Control button
Fan Speed Control
The Fan Speed Control has 4 settings:
• Auto (Cool only) • High • Medium • Low
Temp. Set Controls
Press “
” or “ ” to set temperature.
The setting ranges from 16°C (61°F) to 32°C (89°F).
Note: When choosing Auto, Dehumidify or Fan Mode,
temperature setting button is invalid.
OPERATION- Features of the Control Panel