DCS DRH-48N - Manuel (Page 12)

10
0 0 INSTALLATION
MINIMUM CLEARANCES TO NON-COMBUSTIBLE MATERIAL.
FLOOR
96"
Four Bolts
Per Bracket (installer supplied)
SIDE VIEW
Surface
Non Combustible
Gas Shut-off
Valve
(installer supplied)
Gas Pipe
(installer supplied)
Utilize 2
bolts (min)
per bracket
Drip Leg
with 1/8” NPT
plugged test
gage connection
min.
min. 18"
1/2" Conduit
(installer
supplied)
INSTALLATION
CLEARANCE SPECIFICATIONS
Note: Stainless steel hardware is highly
recommended. Bolts in the wall
should be secured to the wall
studs/structure. Weight of the
heater is 50 lbs.