Oven care, Self-cleaning cycle, Warning – Maytag WOD93EC7AW Manuel d'utilisation

Page 10

Advertising
background image

10

To Set a Delayed Timed Cook:

1. Press START TIME.
2. For double ovens only: Press the number “1” or “2” keypad to

select the desired oven.

3. Press the number keypads to enter the number of hours and/or

minutes you want to delay the start time.

4. Press the keypad for any cooking function except Broil,

Convect Broil or Hold Warm.

5. Press the number keypads to set the desired temperature. If

the temperature entered is not in the range of the temperatures
allowed, the minimum or maximum allowed temperature will be
displayed. Enter a temperature in the allowable range.

6. Press START for the selected oven.
7. Press the number keypads to enter the length of time to cook.
8. Press START for the selected oven.
When the start time is reached, the oven will automatically turn on.
To change the temperature after the delay countdown, repeat steps
5 and 6. To change the time after the delay countdown, press
COOK TIME and then repeat steps 7 and 8.
When the set cook time ends, the oven will shut off automatically.
9. Press CANCEL for the selected oven to clear the display.

OVEN CARE

Self-Cleaning Cycle

IMPORTANT: The health of some birds is extremely sensitive to the
fumes given off during the Self-Cleaning cycle. Exposure to the
fumes may result in death to certain birds. Always move birds to
another closed and well-ventilated room.
Keep the kitchen well-ventilated during the Self-Cleaning cycle to
help get rid of heat, odors and smoke.
Do not block the oven vent(s) during the Self-Cleaning cycle. Air
must be able to move freely. Depending on your model, see “Oven
Vent” or “Oven Vents” section.
Do not clean, rub, damage or move the oven door gasket.

Prepare Oven:

Remove the broiler pan, grid, cookware and bakeware, all
cooking utensils, oven racks and aluminum foil and, on some
models, the temperature probe from the oven.

Use a damp cloth to clean inside door edge and the 1½"
(38 mm) area around the inside oven cavity frame, being certain
not to move or bend the gasket.

Wipe out any loose soil to reduce smoke and avoid damage. At
high temperatures, foods react with porcelain. Staining,
etching, pitting or faint white spots can result. This will not
affect cooking performance.

IMPORTANT:

Oven temperature must be below 500°F (260°C) to program a
clean cycle.

For double ovens only: Only 1 oven can be cleaned at a time.

For double ovens only: Both oven doors will lock when either
oven is running the Self-Cleaning cycle.

How the Cycle Works

IMPORTANT: The heating and cooling of porcelain on steel in the
oven may result in discoloring, loss of gloss, hairline cracks and
popping sounds.
The Self-Cleaning cycle uses very high temperatures, burning soil
to a powdery ash.
Once the oven has completely cooled, remove ash with a damp
cloth. To avoid breaking the glass, do not apply a cool damp cloth
to the inner door glass before it has completely cooled.
The oven light will not work during the Self-Cleaning cycle.
To stop the Self-Cleaning cycle at anytime, press CANCEL. If the
temperature is too high, the oven doors will remain locked.
When the oven is locked, the doors of the oven cannot be opened.
To avoid damage to the doors, do not force the doors open when
the oven is locked.
Before self-cleaning, make sure the doors are completely closed or
the doors will not lock and the Self-Cleaning cycle will not begin.
NOTE: 12 hours must pass before the next Self-Clean can begin.
The oven is preset for the recommended clean cycle; however, the
time can be changed. Suggested clean times are 3 hours for light
soil and between 4

hours and 5 hours for average to heavy soil.

To Self-Clean:

1. Close the oven doors, and then press CLEAN MODES.
2. For double ovens only: Press the number “1” or “2” keypad to

select the desired oven to clean.

3. Press the number “1” keypad for Precise Clean.
4. The recommended default clean time is displayed. To change

the clean time, use the number keypads to enter the desired
time.

5. Press START for the selected oven.

The oven doors will automatically lock.

When the Self-Clean cycle is complete and the oven cools, the
oven doors will unlock.

6. When the oven is completely cooled, remove ash with a damp

cloth.

WARNING

Burn Hazard

Do not touch the oven during the Self-Cleaning cycle.

Keep children away from oven during
Self-Cleaning cycle.

Failure to follow these instructions can result in burns.

Advertising