Maytag MGS8880DS - Manuel (Page 6)

6
BROIL Broiling 1. Press BROIL.
2. Select the broiling temperature by pressing 1 - High or 2 - Low.
3. Press START and allow the oven to preheat for 5 minutes.
4. To change the temperature, repeat steps 2 and 3.
5. Position the cookware in the oven, and then close the door.
6. Press CANCEL when finished.
CONVECT Convection
cooking 1. Press CONVECT until the desired convection mode appears in the display.
2. Press START.
3. Press the number keypads to set the desired temperature.
4. Press START.
5. To change the temperature, repeat steps 3 and 4.
6. Press CANCEL when finished.
KEEP WARM Hold warm Food must be at serving temperature before placing it in the warmed oven.
1. Press KEEP WARM.
2. Set the desired temperature between 145°F and 190°F (63°C and 88°C) using the number
keypads. The default temperature is 170°F (75°C).
3. Press START.
4. To change the temperature, repeat steps 2 and 3.
5. Press CANCEL when finished.
DELAY START Delayed start The Delay Start keypad is used to enter the starting time for an oven function with a delayed
start. Delay Start should not be used for foods such as breads and cakes because they may not
bake properly.
To set a Timed Cook or a Delayed Timed Cook, see “Cook Time” section.
COOK TIME Timed cooking Timed cooking allows the oven to be set to turn on at a certain time of day, cook for a set length
of time, and/or shut off automatically.
To set a Timed Cook or a Delayed Timed Cook, see “Cook Time” section.
POWER
PREHEAT Rapid oven
preheating Provides the fastest preheat time for the Bake function. Power Preheat is preset to Off, but it can
be changed to On.
1. Press POWER PREHEAT.
2. The current setting will be displayed.
3. Press the “1” keypad to adjust the setting.
4. Press START or CANCEL to exit and display the time of day.
IMPORTANT: This feature should only be used for one-rack baking. Unused racks should be
removed prior to Power Preheat. A standard rack should be used for Power Preheat.
If preheating for the Bake cycle has already started, Power Preheat may be started directly by
pressing POWER PREHEAT.
WARMING
DRAWER ON
(HI/MED/LO)/
OFF Warming drawer 1. Press WARMING DRAWER ON to select the Warming Drawer function at the Low setting.
2. To select a higher temperature setting, press WARMING DRAWER ON a second time for the
Medium setting or a third time for the High setting.
3. Press START to begin preheating the warming drawer.
4. Allow the warming drawer to preheat for 15 minutes.
5. Place the cooked food(s) in the warming drawer.
6. Press WARMING DRAWER OFF to turn off the heating element.
See the “Warming Drawer” section for more information.
AQUALIFT
SELF CLEAN Clean cycle See the “Clean Cycle” section.
START
(hold 3 sec
to lock)
Oven control
lockout 1. Check that the oven is off.
2. Press and hold START (hold 3 sec to lock) for 3 seconds.
3. A tone will sound, and “Control Locked” will scroll, and then “Locked” will be displayed.
4. Repeat to unlock. No keypads will function with the controls locked. The cooktop functions
are not affected by the oven control lockout.
SETTINGS/
CLOCK Energy save Press and hold SETTINGS/CLOCK for 3 seconds to change status. The display will scroll
“Energy saver on.” or “Energy saver off.”
If Energy Save is on, the range will go into sleep mode after 5 minutes of inactivity. Any keypad
press will activate the display. If Energy Save is off, the display will be on at all times.
KEYPAD FEATURE INSTRUCTIONS