Maytag MVWB855DC - Manuel (Page 5)

5
CONTROL PANEL AND FEATURES
POWER
Touch to turn the washer on and off. Touch to stop/cancel a
cycle at any time.
WASH CYCLE KNOB
Use the Wash Cycle knob to select available cycles on your
washer. Turn the knob to select a cycle for your laundry load.
See “Cycle Guide” for detailed descriptions.
ESTIMATED CYCLE TIME
The Estimated Cycle Time display shows the time required for
the cycle to complete. Factors such as load size and water
pressure may affect the time shown in the display. Overloading,
unbalanced loads, or excessive suds may cause the washer to
adjust the cycle time, as well.
DELAY START
Use “+” and “–” to delay the start of the wash cycle by up to
12 hours. To turn off Delay Start, use “+” and “–” to set the
delay time to “0,” or touch POWER.
START/PAUSE BUTTON
Touch and hold START/PAUSE button for up to 3 seconds or
until the washer starts to begin the selected cycle; touch again
to pause a cycle.
NOTE: If the washer is spinning, it may take several minutes
to unlock the lid.
1
2
3
4
CYCLE MODIFIERS
The following options may be added to most cycles.
TEMPERATURE
Wash temperature senses and maintains uniform water
temperatures by regulating incoming hot and cold water.
Select a wash temperature based on the type of fabric
and soils being washed. For best results and following the
garment label instructions, use the warmest wash water safe
for your fabric.
• On some models and cycles, warm and hot water may be
cooler than your previous washer.
• Even in a cold and cool water wash, some warm water
may be added to the washer to maintain a minimum
temperature.
SOIL LEVEL
Select the most suitable setting for your load. For heavily
soiled items, select Extra Heavy Soil Level for more wash
time. For lightly soiled items, select Extra Light Soil Level
for less wash time.
Lighter soil level setting will help reduce tangling and
wrinkling.
SPIN SPEED
Select the most suitable setting for your load.
6
3
8
2 1 4
7 5
5
6
NOTE: The control panel features a sensitive surface that responds to a light touch of your finger. To ensure your selections are registered,
touch the control panel with your finger tip, not your fingernail. When selecting a setting or option, simply touch its name until the desired
section is illuminated.
6
3
8
2 1 4
7 5
STEAM MODEL
NON-STEAM MODEL