Touch and hold start to begin wash cycle, Setting a delayed wash, Remove garments promptly after cycle is finished – Maytag MHW8100DC Manuel d'utilisation

Page 13

Advertising
background image

13

13.

Touch and hold START to begin

wash cycle

Touch and hold START to start the wash cycle. To pause

a cycle in progress, touch START once, then touch and

hold again to continue the cycle. To cancel a cycle, touch

POWER/CANCEL.
Once you touch and hold START, you will hear the door lock,

unlock, and lock again. The washer door will remain locked

during the wash cycle.

Unlocking the door to add garments:

If you need to open the door to add 1 or 2 missed

garments, you may do so while the “Add a

Garment” light is lit.
Touch START once; the door will unlock once

the washer movement has stopped. This may take

several minutes. Then close the door and touch and

hold START again to restart the cycle.

12.

Setting a delayed wash

If you do not want to begin a cycle immediately, you may choose

the Delay Hrs. option. This will delay the start of the wash cycle

by up to 12 hours.
To set a delayed wash:
1.
Touch SELECT DELAY HRS. to set the desired delay time.
2. Touch and hold START to start the delay countdown. The

countdown stops blinking.

14.

Remove garments promptly

after cycle is finished

Promptly remove garments after cycle has

completed to avoid odor and rusting of metal

objects on garments. When unloading garments,

pull back the door seal and check for small items

between the tub and the washer drum.
If you will be unable to remove the load promptly,

use the Fresh Hold

®

option. If the Fresh Hold

®

option is selected, the washer will automatically

activate the fan and tumble the load periodically

for up to 12 hours. To turn off the Fresh Hold

®

option, touch

POWER/CANCEL. To set the washer so that the Fresh Hold

®

option does not come on for future cycles, touch Fresh Hold.
NOTES:

n

The door will remain locked while the Fresh Hold

®

option

is active. To cancel the option and unlock the door, touch

POWER/CANCEL.

n

A small amount of water may remain in the dispensers after

the wash cycle is complete. This is normal.

n

This washer has a tight seal to avoid water leaks. To avoid odors,

leave the door open to allow the washer to dry between uses.

OR

Advertising