Fuel caution – Dolmar PS-7900 Manuel d'utilisation

Page 22

Advertising
background image

22

Gasoline

+

It is not wise to add more engine oil than specified

to ensure safe operation. This will only result in a

higher production of combustion residues which

will pollute the environment and clog the exhaust

channel in the cylinder as well as the muffler. In

addition, fuel consumption will rise and perform-

ance will decrease.
Storage:
Fuels have a limited storage life. Fuel and fuel mixtures

age through evaporation, especially at high tempera-

tures. Aged fuel and fuel mixtures can cause starting

problems and damage the engine.Purchase only that

amount of fuel, which will be consumed over the next

few months. At high temperatures, once fuel has been

mixed it should be used up in 6-8 weeks.
Use only approved and marked containers for

transport and storage. Store fuel only in dry, cool

and secure locations!

AVOID SKIN AND EYE CONTACT

Mineral oil products degrease your skin. If your skin

comes in contact with these substances repeatedly

and for an extended period of time, it will desiccate.

Various skin deseases may result. In addition, allergic

reactions are known to occur.
Eyes can be irritated by contact with oil. If oil comes into

your eyes, immediately wash them with clear water.
If your eyes are still irritated, see a doctor immedi-

ately!

OIL

OIL

50:1

DOLMAR

Chain oil

Use an oil with adhesive additive for lubricating the chain and

guide bar. The adhesive additive prevents the oil from being

flung off the chain too quickly.
We recommend the use of chain oil which is bio-degradable in

order to protect the environment. The use of bio-degradable oil

may even be required by local regulations.
The chain oil BIOTOP sold by DOLMAR is made of special

vegetable oils and is 100% bio-degradable. BIOTOP has been

granted the "blue angel" (Blauer Umweltschutz-Engel) for being

particularly environment-friendly (RAL UZ 48).

E

BIOTOP chain oil is available in the following sizes:

1 l order number 980 008 210
5 l order number 980 008 211
20 l order number 980 008 213

Bio-degradable oil is stable only for a limited period of

time. It should be used within 2 years from the date of

manufacture (printed on the container).

50:1

40:1

D

Fuel
CAUTION:

This saw is powered by mineral-oil products (gasoline

(petrol) and oil).
Be especially careful when handling gasoline (petrol).
Avoid all flame or fire. Do not smoke (explosion hazard).

Fuel mixture

The engine of the chain saw is a high-efficiency two-stroke engine.

It runs on a mixture of gasoline and two-stroke engine oil.
The engine is designed for unleaded regular gasoline with a

min. octane value of 91 ROZ. In case no such fuel is available,

you can use fuel with a higher octane value. This will not affect

the engine.
In order to obtain an optimum engine output and to protect

your health and the environment use unleaded fuel only.
For lubricating the engine use a two-stroke engine oil (quality

grade: JASO FC or ISO EGD), which is added to the fuel. The

engine has been designed for use of DOLMAR High Perform-

ance two-stroke engine oil and a mixture ratio of ONLY 50:1

to protect the environment. In addition, a long service life and

reliable operation with a minimum emission of exhaust gases

are ensured. DOLMAR High Performance two-stroke engine

oil is available in the following sizes:

2.6 oz order number 986 100 100
6.4 oz order number 986 100 101

In case DOLMAR High Performance two-stroke engine oil is

not available, it is urgently recommended to use a mixture ratio

of 40:1 with other two-stroke engine oils, as otherwise optimum

operation of the engine cannot be guaranteed.
The correct mixture ratio:
50:1
when using DOLMAR High Performance two-stroke

engine oil, i. e. mix 50 parts gasoline with 1 part oil.

40:1 when using other two-stroke engine oils, i. e. mix 40

parts gasoline with 1 part oil.

NOTE:
For preparing the fuel-oil mixture first mix the entire oil quan-

tity with half of the fuel required, then add the remaining fuel.

Thoroughly shake the mixture before filling it into the chain

saw tank.

1.0 Us-gal.

(3.7 l)

2.6 floz. (75 cm

3

) 3.2 floz. (94 cm

3

)

2.5 Us-gal.

(9.4 l)

6.4 floz. (189 cm

3

) 8.0 floz. (236 cm

3

)

5.0 Us-gal.

(18.9 l) 12.8 floz. (378 cm

3

) 16.0 floz. (473 cm

3

)

Advertising
Ce manuel est liée aux produits suivants: