Danby DDR45E - Manuel (Page 5)

1) POWER Button: On / Off
2) FAN SPEED Button: High / Low
3) TIMER Button: When unit is operating, press
TIMER to set number of hours desired until unit
will shut off.When unit is in stand-by, press
TIMER to set number of hours desired until unit
will turn on.
Setting timer from 1-24 hours. To cancel the timer,
proceed as above but set the “timer off” to zero (0)
hours.
4) °C/°F Button: Press the °C/°F button to toggle
between Celsius and Fahrenheit.
5) Receiving Sensor
6) SET HUMIDITY/CURRENT HUMIDITY
DISPLAY: When machine is running, it displays
the current humidity. Press UP or DOWN buttons
to select humidity setting. The humidity is adjusted
in increments of 5% by each press. Adjustable
range is within 30% RH to 90% RH. 10 seconds
after setting humidity, the display will change back
to the current humidity.
7) CURRENT TEMP/ TIMER SET DISPLAY:
When machine is running, it displays the current
temperature. Press the TIMER button to set the
machine to shut off automatically after specified
amount of time. 10 seconds after displaying the
timer, the display will change back to current
temperauture.
8) DEFROST LIGHT: When temperature is low,
unit enters defrost mode and defrost light
illuminates.
9) BUCKET FULL LIGHT: When water tank is
full, bucket full light illuminates.
OPERATING INSTRUCTIONS
4
• Soft touch (Electronic) Control Key Pads
• Auto-Sensing Humidity Control
• Adjustable Humidity Settings (30% - 90%)
• 2 Fan Speed Settings (High / Low)
• Delay Start Protection (Compressor)
• Auto-Defrost (De-Icer)
• Full Bucket Indicator Light
• Easy Roll Castors (4)
• Front Mounted Water Tank (Removable)
• Direct Drain Option
• Quiet Operation
• Removable Air Filter
FEATURES
Control Panel
Handle
Moist Air
Intake
Air Filter
Drain Bucket
Castors
Dehumidified
Dry Air Vent
Continuous
Drain Outlet
1 2 3
8 6 7
4
9
5