Ganciomatic system, Serial numbers, Accessories – Peg-Perego Pliko Four Stroller Manuel d'utilisation

Page 14

Advertising
background image

- 14 -

10•To tighten the waist strap, pull on both sides in

the direction of the arrow (Fig.a). To loosen it do

the opposite. The waist strap can be tightened as

far as the safety lock (Fig_b).

11•To adjust the height of the safety harnesses, release

the two buckles on the rear of the backrest.

Pull the shoulder straps towards you (arrow a)

until the buckles are released and insert them

in the backrest loops (arrow b). Remove the

shoulder straps from the sack (arrow c) and

insert them in the most appropriate buckle

(arrow d), then reattach the two buckles

behind the backrest (arrow e). The buckles are

securely attached when a click is heard (fig f).

12•ADJUSTING THE FOOTREST: the footrest can be

adjusted to 2 positions. To lower the footrest,

pull the two side levers downwards while

lowering the footrest. To lift the footrest, pull it

upwards until it clicks into place.

13•ADJUSTING THE BACKREST: the backrest

reclines to 4 different positions. To lower the

backrest, lift the handle while lowering the

backrest, locking it in the desired position. To

raise it, pull the backrest upwards.

14•FRONT BAR: to fasten the front bar, slip both

ends of the front bar into the armrests until it

clicks into place.

15•The front bar can be opened to one side only to

allow the child to get in and out of the stroller

easier when he or she is older. To open the front

bar, press the button under the armrest while

pulling out the front bar (Fig.a). To remove

the front bar, press the two buttons under the

armrests while pulling out the front bar (Fig.b).

16•When removing the front bumper, insert the

plugs provided to close the armrests of the

chassis.

17•REAR LEDGE: the rear ledge helps the mother

overcome small bumps and can also be used

to carry a second child (fig_a).

LOADING SEQUENCE: to use the Pliko Four

with two children (fig_b), first set the brakes

on the stroller, then place the smaller child

in the seat and fasten the safety harness (1).

Hold the handlebars (2) and have the second

child stand on the ledge (3).

• Never leave your children unattended.
• Do not allow a child to stand on the rear

ledge when the stroller is empty.

18•FOLDING UP: before folding up Pliko Four,

remove the Navetta XL or the PrimoViaggio

car seat. The stroller can be folded up using one

hand only: pull first one lever upwards and then

the other, until they click.

19•Hold the central handlebar and pull it

upwards until the stroller folds up (fig_a).

Check the correct closure of the chassis from

the safety hook. When folded, the chassis will

stand upright (fig_b).

20•CARRYING: Pliko Four can be conveniently

carried by the central handle (with the front

wheels set on stationary) (fig.a). It can also be

carried by the side handle (fig_b).

21•REMOVABLE LINING: To remove the lining from

the stroller: unhook the sack attachments from

the armrests in the order indicated (fig_a);

unfasten the sack button at the sides; remove

the sack from the footrest; slide the leg divider

part of the strap from under the seat (fig_b);

22•unfasten the sack buttons from the seat;

unscrew the strap (only on one side), by

keeping your finger under the nut; slide it

downwards

GANCIOMATIC SYSTEM

The swift, practical system that allows you to

fasten car seat to stroller (Primo Viaggio SIP

30.30 car seat sold separately).

23• GANCIOMATIC HOOKS FOR THE STROLLER:

to raise the Ganciomatic connectors on

the chassis, pull the lever outwards and at

the same time swivel the two connectors

upwards until they click (fig_a).

To lower the stroller Ganciomatic hooks, pull

the lever outwards while turning the hooks

downwards (fig_b).

24• Pliko Four + Primo Viaggio SIP 3030:

(capacity: 5-30 pounds and up to 30 inches))

to fasten the car seat to the stroller proceed

as follows:

- set the brakes on the stroller;
- lower the stroller backrest completely;
- raise the stroller Ganciomatic hooks;
- place the car seat so that it faces the mother

and press it down until it clicks into place;

- It is important not to remove the front bar from

the stroller when fastening the car seat (for

fastening the front bar, please see point 20);

- To remove the car seat from the stroller,

please refer to its instructions manual.

SERIAL NUMBERS

25•Behind the Pliko Four backrest information

relating to product name, date of

manufacture and serial number of the

product are provided. This information is

required for any complaints.

ACCESSORIES

26•RAIN CANOPY: can be fastened to the hood

Advertising