Fine tuning the guided soundfield – Paradigm CS-LCR v3 Manuel d'utilisation

Page 5

Advertising
background image

4

7.1 Rear Placement Using One Speaker (Fig. 1f)

Center one speaker behind the listening area with domes positioned toward the left and right
sides of the room. Connect to L/R Rears for spacious 7.1 rear-channel sound.
For Connection instructions for ‘SM’ models turn to page 6.

Placement Options for Guided Soundfield

Models

Paradigm

®

Guided Soundfield

in-ceiling speakers are optimized for use in rooms with 8´

(2.4 m) to 9´ (2.74 m) high ceilings. They allow you to “guide” a wide-dispersion arc of
sound toward a specific area of the room in much the same way we guide a floodlight to flood
an area with light. For overall clarity and balanced bass performance, these speakers should
be mounted in the ceiling 12” (30 cm) or more from the wall, as shown in Figs. 2a to 2f.
NOTE: Guiding the sound should be done after connecting the speaker, but before final tightening

of flange screws. See “Fine Tuning the Guided Soundfield

,” below.

Guided Soundfield™ Left/Right Speakers (Fig. 2a) 
Follow the general guidelines for speaker placement provided at the beginning of the main
section, keeping in mind the distance from the front speakers to your primary listening area
should be 10’ (3 m) to 14’ (4.27 m), as shown.
Adding a Guided Soundfield™ Center Speaker (Fig. 2b) 

Follow the directions for placement given earlier, then position the center speaker between
the L/R speakers, with drivers pointed toward the center of the listening area.
GUIDED SOUNDFIELD™ SURROUNDS/REARS
These speakers are also ideal for use as surrounds/rears. “Guiding” the sound toward
the sides and rear of the room creates an enveloping, reverberant soundfield. Keep in mind
that speakers should be mounted 12” (30 cm) or more from the wall.
5.1 Surround Placement (Fig. 2c) 

Position one speaker on either side of the listening area, with drivers pointed toward the
side walls.
6.1 Rear Placement (Fig. 2d) 

Begin with the ‘5.1 Surround Placement’ (above) then center one speaker behind the
listening area with drivers pointed toward the back wall.
7.1 Surround/Rear Placement (Fig. 2e) 

Begin with the ‘5.1 Surround Placement’ (above), then position another pair of speakers
behind the listening area, one slightly right, the other slightly left of the listening position,
with drivers pointed to the back of the room, as shown.
Guided Soundfield™ for Direct-Radiating Surrounds/Rears (Fig. 2f) 

Alternatively, these speakers may be used as direct-radiating speakers, positioned with
drivers pointed toward the listening area. Use Fig. 2f as a guide to positioning as you
experiment to achieve optimal surround sound in your room.

Fine Tuning the Guided Soundfield

Once you have decided on placement, connect the speaker following directions for connection
on page 6. Before final tightening of the flange screws, rotate speaker until drive assembly
points in the desired direction. Then, follow directions for Installation on page 5. To readjust
direction of sound, loosen screws, rotate drive assembly until it points in the desired direction,
then re-tighten screws.

Advertising
Ce manuel est liée aux produits suivants: