Paradigm Cinema 100 2.0 System - Manuel (Page 12)

11
WALL MOUNTING
(CONTINUED)
WALL MOUNTING
(CONTINUED)
Bracket is slotted (see illustration), to allow further adjustment up or down, if necessary. Re-check to
ensure bracket is level. Mark inner screw holes.
Step 2
WARNING! For stability, all four
screws MUST be used
Position bracket and ensure it is level. Mark the two center screw holes. Drill pilot holes, then press
anchor bolts firmly into drywall and screw in. Follow with flathead screws: DO NOT SCREW ALL THE
WAY IN AT THIS POINT—leave screw heads protruding slightly.
VERTICAL MOUNTING
FOR CINEMA ™ 200, 400 & TRIO
Wall screws not supplied
Step 1
Position bracket vertically
on wall as shown, then
follow the steps for
horizontal positioning.
NOTE: This step is for
positioning only. Screws
will be removed in next
step to allow installation of
additional anchor bolts
HORIZONTAL MOUNTING
FOR CINEMA ™ 200, 400 & TRIO