Danby DWBC14BLS - Manuel (Page 6)

OPERATING
THE CONTROLS
OPERATING INSTRUCTIONS (cont’d)
5
POWER LIGHT RUN
Activation
Upper chamber Lower chamber
Set Upper
REGLER SUPÉRIEURE
Set Lower
REGLER INFÉRIEURE
1 2
3
4 5 6 7
1) Power ON/OFF switch. 6) °C/°F: Adjacent indicator light denotes
2) Interior lights ON/OFF switch(while the which scale of temperature is displayed.
door stays closed) 7) ‘Set Upper’ button: Used to set the
3) Run: Indicator light illuminates to signify temperature in the upper zone (see ‘Setting
that the cooling mode is currently in operation the Temperature’ below).
4) Upper chamber display: Display screen
shows current cabinet temperature and set
‘Set Lower’ button: Used to set the
temperature of the upper zone. temperature in the lower zone (see ‘Setting
5) Lower champer display: Display screen the Temperature’ below).
shows current cabinet temperature and set
temperature of the lower zone.
SETTING THE
TEMPERATURE
In the event of a power failure, wait 3 to 5 minutes before restarting
• To switch the display between the Fahrenheit (°F) and Celsius (°C) scale, depress the ‘Set Upper’ and ‘Set
Lower’ control buttons simultaneously for approximately five (5) seconds.
• The temperature range can be set as low as 39°F (4°C) or as high as 64°F (18°C) to suit your specific
beverage requirements. Each depression of the ‘Set Upper’ or ‘Set Lower’ button will allow you to adjust the
temperature in 1° increments within the aforementioned range.
• You may view your ‘set’ temperature at any time by briefly depressing either the ‘Set Upper’ or ‘Set Lower’
button. The set temperature will flash in the display area for 5 seconds before the display resumes showing the
current cabinet temperature.
STORAGE