Danby SBWC011A1B - Manuel (Page 6)

Control Buttons
Cooler (-1ºC/ºF)
This button decreases the set temperature.
Warmer (+1ºC/ºF)
This button increases the set temperature.
Celsius and Fahrenheit
Switches between celsius and fahrenheit.
Light
This button turns the interior light on or off.
Setting the Temperature
The temperature can be set between 10ºC and 18ºC
(50ºF and 64ºF):
• To increase the set temperature, press the Warmer
button until you reach your desired temperature.
• To decrease the set temperature, tap the Cooler
touch-pad until you reach the desired temperature.
NOTE: When changing the temperature, the present
set temperature flashes in the LED display. After a few
seconds the set temperature stops flashing, and the dis-
play resumes showing the actual temperature inside the
wine cooler.
Changing Between ºC and ºF
• To change between °C (Celsius) to °F (Fahrenheit),
tap the ºC/ºF pad once.
Turning the Light On or Off
You can set your display light to be continuously lit, or lit
only when the door is open. To adjust the light setting:
• Tap the Light pad once to change the light
setting.
Loading
Wine should be loaded with corks facing the door. This
wine cooler is designed to hold no more than 12 stan-
dard 750ml wine bottles. Load the wine cooler as fol-
lows:
• Load up to 3 bottles per rack.
• Load up to 3 bottles on the base of the wine
cooler.
O P E R A T I O N
4
ºC/°F
°C/°F