Danby DPA100B2WDB - Manuel (Page 13)

Installation Instructions
INSTALLATION IN A
DOUBLE- HUNG SASH
WINDOW 1. Measure the adhesive foam seal to fit the window stool. Then cut the
foam seal to the proper length and attach it to the window stool. Fig.9
2. Attach the window slider kit to the window stool. Adjust the length of
the window slider kit according to the width of window. Shorten the
adjustable window kit if the width of window is less than 28. 3 inches.
Open the window sash and place the window slider kit on the window
stool. Fig.10
3. Cut the foam seal (adhesive type) to the proper length and attach it on
the top of the window. Shown in Fig.11
4. Close the window sash securely against the window.
5. Cut the foam seal to an appropriate length and seal the open gap
between the top window sash and outer window sash. Shown in
Fig.12.
Foam seal A
(adhesive type)
Fig.9
Fig.10
Window Kit
Window Stool
Fig.11
Window Kit
Window Stool
Fig.12
Foam seal
11
Foam seal B
Foam seal B
28.34 ~ 81.5