Doro 311C - Manuel (Page 4)


English
Connection
1. Connect the handset curly cord to the handset and the socket on the
left-hand side of the telephone.
2. Connect the telephone line cord to the socket at the rear of the
telephone, and to a telephone network wall socket.
3. You will hear a click when the modular plug is correctly in place.
4. Lift the handset and listen for the dial tone. Your telephone is now
operational.
Wall mounting
The telephone can be wall mounted using two screws positioned
vertically at a distance of 100 mm, the screws should fit into the
‘keyholes’ on the back of the telephone. Remove the hanger hook (please
refer to diagram on page 2) by pushing it upwards, then rotate it 180
degrees and replace it.
Hearing Aid compatible
This telephone is hearing aid compatible. Select the T mode on your
hearing aid to enable this feature.
Mute button
Press and release z to mute the handset microphone during a call, the
light next to the button will flash while the microphone is muted. Press
and release z again to continue with your telephone conversation.
Redial button
If the number dialled is engaged or you wish to dial the last number
called lift the handset and press and release r . Redial will not work if
the number dialled was from memory (i.e. M1, M2, M3 or 0-9).