Aiphone PS-12F Manuel d'utilisation
Ps-1 2f, Power supply adaptor 1, Timstructions
Attention! Le texte de ce document a été détectée automatiquement. Pour consulter le document original, vous pouvez utiliser le mode "Original".

1091
® AlPHONE
f
POWER SUPPLY ADAPTOR 1
Model;
PS-1 2F
(AC 120V, 50/60 Hz.,
UL/CSA approved)
J
tIMSTRUCTIONS
^ NAMES AND FUNCTIONS
a
90 mm
© DC output terminals
©Grounding terminal
©Terminal cover
©AC cord
This symbol on the nameplate means the product
is Listed by Underwriters Laboratories Inc.
FEATURES
* PS-12F is a power supply for Aiphone's intercom system, etc.
* Mounts onto single-gang box (mounting bracket is included).
RATINGS
* Input voltage;
* Power consumption:
* Output voltage:
* Rated output current:
PS-12F: AC 120 V, 50/60 Hz. UL/CSA APPROVED.
42 W.
DC 12 V.
2.5 A.
INSTALLATION
1. Before wiring on PS-12F, check if power supply line of the intercom system installed is not shorted.
PS-12F has DC plus and minus output terminals. Observe polarity. Attach grounding wire to GND terminal.
After wiring, attach terminal cover on PS-12F.
2. Always refer to the Instructions supplied with the intercom system you are installing.
3. While being used, the unit case will get warmed, but this is not a unit disorder.
CAUTION
* To prevent fire or shock hazard, do not expose this
appliance to rain or moisture.
* No user-serviceable parts inside. Refer servicing to
qualified service personnel.
*
Afin d’empêcher un électrochoc, ne pas enlever le couvercle.
Les réparations ne devront être faites que par des personnes
qualifiées.
*
Cet appareil ne devrait pas être exposé à la pluie ou à
l’humidité, pour empêcher la possibilité de feu ou choc.