Hamilton Beach 8400060900 - Manuel (Page 3)

8 4 0 0 6 0 9 0 0 E v 0 2 . q x d 8 / 1 8 / 9 9 5 : 0 1 P M P a g e 4
How to Assemble and Use
CAUTION: Be sure cord is not connected to electric outlet
when removing or inserting blades and when knife is not in
use. The blades are extremely sharp. Always handle by the
side opposite the cutting edge, as illustrated, or by the plastic
guards.
1. If blades are separated, pick up by the plastic guard. Slide
the rivet on one blade into the keyhole slot in the other
blade until they are locked together.
2. Holding blades together
at the base of the blade
with cutting edge down,
slide into motor housing
until both blades click
into place.
3. Plug cord into outlet.
4. Hold knife by handle. Push On/Off button to operate. You
must hold the button “On” for the knife to operate.
5. To stop, release button.
Slicing Guide - Optional Feature on Selected Models
The slicing guide allows you to slice uniform slices, from thin
to thick. It is designed for both right and left-handed use, as
it can be inserted into either side of the knife.
1. Before first use, carefully wash the blades and slicing guide
in hot, soapy water. Rinse and dry.
2. Make sure the knife is unplugged. Insert the blades as
instructed in “How to Assemble and Use.”
3. Insert the prongs of the slicing
guide into the slots on the knife
body. See iilustration.
UNPLUG KNIFE BEFORE
ATTACHING OR REMOVING
THE SLICING GUIDE.
4. Adjust slicing guide to desired
thickness by sliding prongs into
or out of slots.
5. When finished slicing, unplug knife.
Remove slicing guide by pulling
straight out. Wash in hot, soapy
water. Rinse then dry. Disassemble,
clean, and store knife and blades as
instructed in the following section.