Toa N-8000RS - Manuel (Page 14)

14
Step 4. Insert the wired terminal plug into the terminal block of the N-8000RS.
N-8000RS rear panel
2
3
4
Removable terminal block
Removable terminal plug
(accessory)
Tighten
6.5. e-7000Tb Terminal board Wiring
For cable connection to the E-7000TB Terminal Board, use the optional YC-105 Clipping tool.
Hook the end of the cable onto the terminal and, with the cable end in hand, press the YC-105 down onto the
terminal from above. Pressing down the YC-105 tool cuts off the excess cable end, securing the connection.
For cables, refer to p. 13, "Type of Cable."
Terminal board E-7000TB
Cable
Hook the cable onto
the terminal without
stripping the cable
sheath.
Yellow Gray
Clipping tool YC-105
(Optional)
Bind the cables using the cord
clamps supplied with the E-7000TB.
Cut end
Terminal