Classe Audio CDP-202 - Manuel (Page 39)

39
ENGLISH
Specifications – CDP-102
All specifications are accurate at the time of printing. Classé reserves the right to
make improvements without notice.
■ Frequency response
(Balanced) 8 Hz – 20 kHz ±0.1dB
(single ended) 8 Hz – 20 kHz +0/-0.7dB
■ Distortion (THD+noise) 0.001%
■ Output voltage (single-ended) 2Vrms
■ Output voltage (balanced) 4Vrms
■ Signal-to-noise ratio 110dB typical
■ Channel separation better than 115dB
■ D/A Converter 1 x Cirrus Logic CS4398
■ Audio sample rate 192kHz
■ Formats supported CD, CD-R, CD-RW, DVD Audio, DVD Video,
VCD, SVCD, MP3, AAC, WMA, DTS CD,
DVD-R, DVD+R, DVD-RW, DVD+RW
■ Power consumption 55W
■ Mains voltage determined by the needs of country for which
the unit was manufactured; cannot be reset by dealer or user
■ Overall dimensions Width: 17.5” (445mm)
Depth: 16.5” (419mm)
Height: 4.75” (121mm)
■ Net weight 27 lbs (12.3 kg)
■ Shipping weight 35 lbs (15.9 kg)
For more information, see your Classé dealer
Classé Audio
5070 François Cusson
Lachine, Quebec
Canada H8T 1B3
Telephone +1 (514) 636-6384
FAX
+1 (514) 636-1428
Internet: http://www.classeaudio.com
email:
[email protected]
Classé and the Classé logo are trademarks of Classé Audio Inc. of Lachine, Canada. All rights reserved.
i-Command™ is a trademark of Equity International, Inc. All rights reserved.
AMX
® is a registered trademark of AMX Corporation of Richardson, TX. All rights reserved.
Crestron™ is a trademark of Crestron Electronics, Inc. of Rockleigh, NJ. All rights reserved.