NEC MultiSync MT810 - Manuel (Page 16)

USERS MANUAL
Settings Menu
BjlsEniNQS rENU
icusToi reuRv
j£USnXL2.
Enables you to set preferences and other operating options. Use the “Select” button on the projector
cabinet or (A) (▼) buttons on your remote control to access the submenu you want.
Custom Memory
This enables you to save your current settings for an RGB source in one of five memories, Custom
1-5.
To use this feature:
1. Connect your computer to the MultSync MTS 10.
2. Select the "STANDARD" in RGB 1 or RGB 2 source.
3. Adjust the horizontaiyvertical position. Picture, and Fine adjustments.
4. Select the Custom Memory icon.
5. Press the "Adjust" (+) or (-) buttons to choose a memory location, then press "Enter" on the cabinet
or the "Left Click" on your remote control to save the new settings.
Image Loop
This feature enables you to “capture” an image from a source that is currently being displayed. Up
to 8 images can be stored.
Press the “Adjust” (+) or (-) buttons to select "Start" for the image you want to loop and “Capture”
for the image you want to capture or to select “Delete” and delete all captured images from memory.
Press “Enter” on the cabinet or the “Left Click” on your remote control to save your image loop
m
changes. To stop an image loop, switch to another input with the “Video”, “S-Video”, “RGB 1”
or “RGB2” button, or using the Source menu.
Background
Use this feature to display a black or blue screen or to start an image loop when no input
signal is available.
Press the “Adjust” (+) or (-) buttons to choose the back screen you want — blue, black or
an image loop. Press “Enter” on the cabinet or the “Left Click” on your remote control to
save your change.
Projection
This reorients your image for your type of projection. Press the “Adjust” (+) or (-) button
until it is correct. The options are: front floor projection, rear ceiling projection, rear floor
projection, and front ceiling projection.
Press “Enter” on the cabinet or the “Left Click” on your remote control to save the new
setting.
Language
Use the “Adjust” (+) or (-) to choo.se one of six languages for on-screen instructions. The
options are: English, German, French, Italian, Spanish and Swedish.
Press “Enter” on the cabinet or the “Left Click” on your remote control to save the new
setting.
Reset
Changes all adjustments to the factory preset levels for each source individually. To activate,
you must hold down the “Adjust” (+) button on the cabinet or remote control for at least two
seconds. The adjustments that will be reset are horizontal and vertical control (for the current
source only), picture and fine picture adjustment, brightness, contrast, color, tint, and
sharpness.
OPERATION
1
3-30